two summarize routes

[azmath.hk]

Dear support guys,

Can we advertise only the two summarize routes 10.8.0.0/16 and 10.4.0.0/16 on our CISCO routers which are connected to our collabarative network?

[satish_zanjurne]

Hi,

It is important to know where you are summarizing the routes in the Network and in which routing protocol you are running ??

[azmath.hk]

We are running OSPF routing protocol and we want to configure this on our perimeter devices which are connected to our collabarative network.

[azmath.hk]

Please answer my question

[satish_zanjurne]

Yes it is possible, provided you are aware of the collaborative network address space.

I mean to say , there are no discontigeous subnets/address space.

[gojericho0]

You must also do this on an ABR when summarizing between areas.

You can use the area range command to summarize between areas

Use the summary-address command if you are summarizing outside OSPF or within a different process

http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml#t28