cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
440
Views
0
Helpful
4
Replies

Unable to access website hosted inside network

Linto Mookken
Level 1
Level 1

Dear Team,

Apologies if my language is not good.

I am not that much familiar in this community. Today i configured one Cisco 1900 series router in my office, but i am unable to access the website which is hosted in my office and it is accessible from outside.

Could you please help me to resolve the issue?

Thanks in advance!!!

Linto Anto

4 Replies 4

jeff-ferguson
Level 1
Level 1

Can you provide the firewall configure used to allow external access?

Thank you Jeff for your response.

Here i am attaching my Cisco router configuration for your reference. Website server local IP is 10.0.0.17

Hello

I would prefer using NVI Nat for this but since you have domain Nat running well go with this but amend some configuration.

Nat doesn't like referring to ACLs with any any, So can you remove the acl 120 from your outside interface as this isn't doing anything that having no acl applied would also do

No access-list 120

access-list 120 permit ip 10.0.0.0 0.0.0.255 any

Lastly, -Remove NVI nat for now (ip nat enable ) and test

res

Paul


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Peter Koltl
Level 7
Level 7

remove 

ip nat enable

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card