Hi,
If suddenly license expired, will router unable to be configured with BFD? Originally, router is configured using BFD. Then, noticed that router down and unreachable remotely. But later when I checked the syslog, there was no log that indicate BFD was down after the log that indicate that license was expired.
PID: ASR-920-12CZ-D
Software: 03.17.01.S / 15.6(1)S1
License: metroipaccess
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#bfd ?
% Unrecognized command
Router(config)#bfd
^
% Invalid input detected at '^' marker.
Router(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
accounting Policy accounting feature
acr Configure ACR type
alarm-contact Configure the system alarm contact settings
alias Create command alias
archive Archive the configuration
arp Set a static ARP entry
async-bootp Modify system bootp parameters
audit Router Audit
auto-ip-ring Auto-IP-Ring global configuration commands
autonomic Autonomic Networking
banner Define a login banner
bba-group Configure BBA Group
beep Configure BEEP (Blocks Extensible Exchange Protocol)
boot Modify system boot parameters
bridge Bridge Group.
bridge-domain Bridge-domain global configuration commands
buffers Adjust system buffer pool parameters
bulkstat Bulkstat Application
Thank you
.jpg "VIP Master"){kind=icon}
