cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
539
Views
0
Helpful
1
Replies

Unable to load ASDM 7.1

joeaviles
Level 1
Level 1

Hello all,

        I'm very new to the Cisco ASA world. I'm trying to access ASDM but everytime I put in the IP address I just get cannot display webpage: Here is the copy of my configuration...can someone tell me where I'm going wrong? Thanks

ASA Version 9.1(1)

!

hostname ciscoasa

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

names

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!            

interface Vlan1

nameif inside

security-level 100

ip address 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

ip address dhcp setroute

!

ftp mode passive

object network obj_any

subnet 0.0.0.0 0.0.0.0

pager lines 24

logging asdm informational

mtu inside 1500

mtu outside 1500

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-711-52.bin

no asdm history enable

arp timeout 14400

no arp permit-nonconnected

!

object network obj_any

nat (inside,outside) dynamic interface

timeout xlate 3:00:00

timeout pat-xlate 0:00:30

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

timeout floating-conn 0:00:00

dynamic-access-policy-record DfltAccessPolicy

user-identity default-domain LOCAL

http server enable

http 192.168.1.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

crypto ipsec security-association pmtu-aging infinite

crypto ca trustpool policy

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd auto_config outside

!            

dhcpd address 192.168.1.5-192.168.1.36 inside

dhcpd enable inside

!

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

!

class-map inspection_default

match default-inspection-traffic

!

!

policy-map type inspect dns preset_dns_map

parameters

  message-length maximum client auto

  message-length maximum 512

policy-map global_policy

class inspection_default

  inspect dns preset_dns_map

  inspect ftp

  inspect h323 h225

  inspect h323 ras

  inspect rsh

  inspect rtsp

  inspect esmtp

  inspect sqlnet

  inspect skinny 

  inspect sunrpc

  inspect xdmcp

  inspect sip 

  inspect netbios

  inspect tftp

  inspect ip-options

!

service-policy global_policy global

prompt hostname context

no call-home reporting anonymous

Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e

: end

Regards,

One Confused Tech!!

1 Reply 1

jj27
Spotlight
Spotlight

Hi,

I had a similar bug that I ran into after upgrading to 9.1 and ASDM 7.1.  You may try looking into this and see if it fixes your problem.

Problem: Unable to access ASDM when SSL encryption level is set to AES256-SHA1

User is unable to access ASDM when SSL encryption level is set to AES256-SHA1 on the PC.

Solution

This issue occurs when the command ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1 is used which sets encryption level to AES256-SHA1. The issue can be resolved by either removing this command or by installing the JCE version of Java so that the PC becomes AES 256 compatible.