Unable to Ping another network via router

[angadmanroy]

I was trying to create 2 networks (with N/w IDs -> 192.168.1.0 and 192.168.2.0), followed by joining these two via a router in cisco packet tracer. Now, I have assigned ips 192.168.x.i (x = 1,2 ; i = 1,2,3 i.e. 2 networks with 3 devices each). I even configured the router interfaces g0/0/0 and g0/0/1 but somehow am still unable to ping pcs in the other network.

I have attached images of the network layout and status of the pc, switches and router below.

May someone please point out what am I missing exactly?

[balaji.bandi]

From PC 192.168.1.2 can able to ping 192.168.1.1 ?

From PC 192.168.2.2 can able to ping 192.168.2.1 ?

YES - then check PC has any FW ?

Also check on router are you able to see show IP arp all the IP of PC ?

check IP routing enabled on  router (most new router should be enabled default)

still not working

show run from Router and switch will be helpfull.

[angadmanroy]

Tried to ping 192.168.1.1 (default gateway) from 192.168.1.2 but neither am I able to ping nor is the request getting timed out.

[balaji.bandi]

post below as requested information : 

show run from Router and switch will be helpful.

[Martin L]

You can attach your PT file here (must be in a zip format).

Regards, ML
**Please Rate All Helpful Responses **