cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13149
Views
15
Helpful
11
Replies

Unable to upgrade rommon on 2801

Hello, I would like to upgrade rommon on my Cisco 2801 but this is what I get:

Router#upgrade rom-monitor file flash:C2800NM_RM2.srec.124-13r.T11

This command will result in a  'power-on reset' of the router!

Continue? [yes/no]: yes

ROMMON image upgrade in progress.

Erasing boot flash eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Programming boot flash ppppppppppp

Now Reloading

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2006 by cisco Systems, Inc.

The router stops here and I am forced to power off and on again and the upgrade does not succeed.

Thanks in advance for any suggestions.

11 Replies 11

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

try this one

This is for 2801

C2801_RM2.srec.123-8r.T9
Release Date: 06/OCT/2008
C2801 ROMMON Upgrade; Use with IOS 12.3(

Size: 856.43 KB (876981 bytes)

Here is the link to it:

http://www.cisco.com/cisco/software/release.html?mdfid=279316777&catid=278875243&softwareid=280805687&release=12.3%288r%29T9&rellifecycle=&relind=AVAILABLE&reltype=latest

HTH

Reza

SunilKhanna
Level 1
Level 1

Hi,

Just thought of sharing a useful URL when upgrading ROMMON

Regards,
Sunil
Regards, Sunil Khanna

Leo Laohoo
Hall of Fame
Hall of Fame

Router#upgrade rom-monitor file flash:C2800NM_RM2.srec.124-13r.T11

Now Reloading

System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

Your ROMmon file wasn't "accepted".  You are upgrading to T11 but the router is continuously using the T version.

Peter Paluch
Cisco Employee
Cisco Employee

Matteo,

The ROMMON image C2800NM_RM2.srec.124-13r.T11 is not suitable for C2801 in particular. It would run in 2811, for example, but specifically for 2801 routers, this ROMMON image is not compatible. That is the reason the upgrade fails: the router cannot boot with this ROMMON so after a next power-on, it reverts back to the primary ROMMON stored in its immutable ROM memory.

The latest ROMMON image for 2801 is the C2801_RM2.srec.124-13r.T5, see

http://www.cisco.com/cisco/software/release.html?mdfid=279316777&flowid=7545&softwareid=280805687&release=12.4(13r)T5&rellifecycle=&relind=AVAILABLE&reltype=all

Try this one and let us know if the upgrade finally worked for you.

Best regards,

Peter

Peter Paluch wrote:

The ROMMON image C2800NM_RM2.srec.124-13r.T11 is not suitable for C2801 in particular.

It is listed in 2801's downloads though. Probably by error.

Hi,

Certainly an error. I had some troubles personally with the ROMMON upgrade until I've found out that the image in fact does not suit the 2801 platform.

Note the "NM" naming - it always refers to higher 2800 routers than 2801. That was my first clue.

Best regards,

Peter

It's almost a year later now, and this  - C2800NM_RM2.srec.124-13r.T11 is still listed as the latest release for the 2801.  Is that still wrong?

Hi Edward,

Yes, it is still wrong.

Best regards,

Peter

Can you please post the complete output to the command "sh version"?

I haven't started the update yet, I needed to be sure I had the right files first.

Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 15.1(2)T1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Wed 11-Aug-10 13:18 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

router uptime is 2 years, 2 weeks, 5 days, 2 hours, 8 minutes

System returned to ROM by power-on

System restarted at 11:37:30 EDT Fri Oct 1 2010

System image file is "flash:c2801-spservicesk9-mz.151-2.T1.bin"

Last reload type: Normal Reload

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2801 (revision 7.0) with 239616K/22528K bytes of memory.

Processor board ID FTX133482ZL

2 FastEthernet interfaces

4 Voice FXO interfaces

4 Voice FXS interfaces

1 DSP, 8 Voice resources

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

126000K bytes of ATA CompactFlash (Read/Write)

License Info:

License UDI:

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        CISCO2801             XXXXXXXXXX

Configuration register is 0x2102

31-07-2013 file is still there..

Spend 30 minutes solving this .. rommon is still there for the CISCO8201 .. but does not work at the CISCO2801 that i have here..

Great Cisco .. remove the file please

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: