09-24-2020 02:11 AM - edited 09-24-2020 02:48 AM
Hello
I have ASR 903 cisco and wa want update IOS from sw version 15.4(3)S3 to 16.9.4 sw version
So what are command that allow update ASR 903 to 16.9.4 sw version !!
i wait a reply from expert ASR cisco and answer what are the steps to upgrade IOS ASR 903
thanks in adv
Solved! Go to Solution.
09-24-2020 04:34 AM - edited 09-24-2020 04:34 AM
Hello Dhikra,
Cisco IOS-XE upgrades are extensively documented by Cisco for various platforms. A quick search on the web can get you the necessary answer. Take for example this document:
https://www.cisco.com/c/en/us/td/docs/routers/asr903/upgrade/guide/b-upgrade-3x-16x-asr900.pdf
It's easy and quick to read. It explains the upgrade procedure for the ASR900 platform, requirements and possible restrictions when upgrading.
And like Leo mentioned, id you're having troubles with the process, you can always open a service request with TAC, giving the fact that you have the appropriate support contract.
Thank you.
Marin
09-24-2020 07:57 AM - edited 09-24-2020 07:58 AM
Hello @Dhikra Marghli ,
yes the section about upgrading from version 3.x to 16.x applies to your case.
Please note the following:
you need to upgrade the ROMMON too as explained in the guide before upgrading the IOSXE image.
Note also that moving to release 16.9.4 > 16.9.1 will move your device to Smart Licensing be aware of this.
if there are no specific reason for going to 16.9.4 you can consider a release before 16.9.1 to avoid to change your licensing model.
Hope to help
Giuseppe
09-24-2020 02:19 AM - edited 09-24-2020 03:13 AM
It is not helpful !!!!
Please i wait answer for my request from expert ASR that give me the procedure to upgrade IOS for ASR903 cisco to the 16.9.4 sw version
best regards
09-24-2020 03:20 AM
This is a professional forum. Act appropriately and accordingly.
Posting multiple threads of the same issue is not going to help.
If you want immediate attention and on-the-spot answer, raise a TAC Case.
09-24-2020 03:29 AM
Hello Leo
I have been a member of this forum for almost two years and I am a professional network in the company
can you help or not !!
have you answer for my request , so give me !! or not
So please , don't tell me things aren't related to my request !!
i wait your help if you know , else i wait answer from other expert !!
best regards
09-25-2020 06:16 PM - edited 09-25-2020 06:23 PM
@Dhikra Marghli wrote:
I have been a member of this forum for almost two years
This is a professional forum. Act appropriately and accordingly.
I have been a member for >10 years -- so I "outrank" you.
Every contributor in this forum is a volunteer. No one here is paid by Cisco to offer technical support for free.
If you really, really want everyone to "drop everything" and focus their attention on you, raise a TAC Case.
09-24-2020 04:34 AM - edited 09-24-2020 04:34 AM
Hello Dhikra,
Cisco IOS-XE upgrades are extensively documented by Cisco for various platforms. A quick search on the web can get you the necessary answer. Take for example this document:
https://www.cisco.com/c/en/us/td/docs/routers/asr903/upgrade/guide/b-upgrade-3x-16x-asr900.pdf
It's easy and quick to read. It explains the upgrade procedure for the ASR900 platform, requirements and possible restrictions when upgrading.
And like Leo mentioned, id you're having troubles with the process, you can always open a service request with TAC, giving the fact that you have the appropriate support contract.
Thank you.
Marin
09-24-2020 04:42 AM
Hello Marin
thanks to reply me
i want to ask and to know if page 12 and page 13, this two page speaks about upgrade ASR 903 to ios 16.9.4 !!!
if " Upgrading from Cisco IOS XE Release 3.x to Cisco IOS XE 16.x " speak about my request !!??
thanks in adv
09-24-2020 07:57 AM - edited 09-24-2020 07:58 AM
Hello @Dhikra Marghli ,
yes the section about upgrading from version 3.x to 16.x applies to your case.
Please note the following:
you need to upgrade the ROMMON too as explained in the guide before upgrading the IOSXE image.
Note also that moving to release 16.9.4 > 16.9.1 will move your device to Smart Licensing be aware of this.
if there are no specific reason for going to 16.9.4 you can consider a release before 16.9.1 to avoid to change your licensing model.
Hope to help
Giuseppe
09-24-2020 08:14 AM
OK Giuseppe Larosa
I try and i tell you if it is all OK and fine !!
thanks to reply me !!
10-01-2020 03:00 AM
Yes it is ok we try do day and step are ok
thanks to help me!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide