cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
513
Views
1
Helpful
1
Replies

Upgrade to version 7.5.2 on ASR9901

oscar.garcia88
Level 1
Level 1

Hello!

I recently upgrade an ASR 9901 from version 7.3.2 to version 7.5.2, the version was installed, but when issue the command show install active from admin I do not see the same information, do you know what is the problem. Please help me to figure this out

1 Accepted Solution

Accepted Solutions

M02@rt37
VIP
VIP

Hello @oscar.garcia88,

No problem with your ASR 9901 or the upgrade process.

In the first CLI session, you are in the RP context, and you see the output of show install active for both the RP and LC nodes. In this output, you can see that multiple packages are listed for both RP and LC.

In the second CLI session, you are in the

sysadmin

context, and you see the output of show install active for the

sysadmin-vm

view. This view only shows the packages related to the

sysadmin

image, not the full set of packages running on the router. In this output, you see only the

asr9k-sysadmin-7.5.2

package listed.

The reason for this difference is that the

sysadmin-vm

view shows the packages related to the

sysadmin

process, which is responsible for the

sysadmin

shell and other

sysadmin

related tasks. This view does not include the full set of packages running on the router, which includes IOS XR packages.

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

View solution in original post

1 Reply 1

M02@rt37
VIP
VIP

Hello @oscar.garcia88,

No problem with your ASR 9901 or the upgrade process.

In the first CLI session, you are in the RP context, and you see the output of show install active for both the RP and LC nodes. In this output, you can see that multiple packages are listed for both RP and LC.

In the second CLI session, you are in the

sysadmin

context, and you see the output of show install active for the

sysadmin-vm

view. This view only shows the packages related to the

sysadmin

image, not the full set of packages running on the router. In this output, you see only the

asr9k-sysadmin-7.5.2

package listed.

The reason for this difference is that the

sysadmin-vm

view shows the packages related to the

sysadmin

process, which is responsible for the

sysadmin

shell and other

sysadmin

related tasks. This view does not include the full set of packages running on the router, which includes IOS XR packages.

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
Review Cisco Networking for a $25 gift card