cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2686
Views
0
Helpful
4
Replies

Upgrading IOS on Cisco 7604 router

chris.lau
Beginner
Beginner

Hello there,

Does anyone have the procedures of upgrading IOS software on Cisco 7604 router?

Thanks

1 Accepted Solution

Accepted Solutions

4 Replies 4

Hi,


Please find the 7200 IOS upgradation procedure from cisco


http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml


Thanks

Karuppu

Hi,

Thanks for your help. I will go onsite and try it out.

Hi,

If you are Ok with outage during upgrade it is as easy as changing the boot variable to refer to new image (assuming you have new image in your disks) and reload the router.

If you are looking for very less outage then In Service Software Upgrade (ISSU) is what you have to target.

Thanks,

Madhu

Alexander Pai
Beginner
Beginner

Hi Chris,

With a single supervisor, the upgrade process is generally the same proceedure as the 7200, or any other IOS based platform.  However, if you've got dual supervisors and you want to minimize downtime, you may want to use the in service software upgrade proceedure:

http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/efsuovrw.html

-Alex

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers