I have a new 1941 that the USB data ports are not appearing.
It is running 15.4
The following results are with flash drives plugged into the USB0 and USB1 slots.
In doing a DIR, get the following listed:
dir ?
/all List all files
/recursive List files recursively
all-filesystems List files on all filesystems
archive: Directory or file name
cns: Directory or file name
flash0: Directory or file name
flash1: Directory or file name
flash: Directory or file name
null: Directory or file name
nvram: Directory or file name
system: Directory or file name
tar: Directory or file name
tmpsys: Directory or file name
xmodem: Directory or file name
ymodem: Directory or file name
| Output modifiers
<cr>
(No reference to USB drives)
--
Sh USB Device 0 (or device 1) gets:
Device not found
--
Show USB Port 0:
Port Number: 0
Status: Enabled
Connection State: Connected
Speed: High
Power State: ON
Similarly, Sh USB Port 1:
Port Number: 1
Status: Enabled
Connection State: Connected
Speed: High
Power State: ON
--
Sh usb controllers 1:
Name: HCD5200
Controller ID: 1
Controller Specific Information:
USB port 0
USB registers
USB CLCK CNTL: 0x000000000002683D
USB GAHBCFG: 0x0000000000001408
USB GUSBCFG: 0x00000000000001A1
USB GINTMSK: 0x000000008BC744A0
USB HCFG : 0x000000000000EA60
CONTROL TRANSFER Statistics
Success 6, Crc 0, Bit Stuffing 0, Stall 0
No Response 0, Overrun 0, Underrun 0
Buff overrun 0, Buff underrun 0, Cancelled 0
Invalid Handle 0, Host hw error 0, Semaphore timeouts 0
Default errors 0
BULK TRANSFER Statistics
Success 0, Crc 0, Bit Stuffing 0, Stall 0
No Response 0, Overrun 0, Underrun 0
Buff overrun 0, Buff underrun 0, Cancelled 0
Invalid Handle 0, Host hw error 0, Semaphore timeouts 0
Default errors 0
INT TRANSFER Statistics
Success 0, Crc 0, Bit Stuffing 0, Stall 0
No Response 0, Overrun 0, Underrun 0
Buff overrun 0, Buff underrun 0, Cancelled 0
Invalid Handle 0, Host hw error 0, Semaphore timeouts 0
Default errors 0
-----
While not having the USB running is minor, I would like to be able to get everything working properly.
Thoughts or suggestions?
Thank you
