About pd4294

pd4294 · 10-13-2020

I have a new 1941 that the USB data ports are not appearing.It is running 15.4The following results are with flash drives plugged into the USB0 and USB1 slots.In doing a DIR, get the following listed:dir ?/all List all files/recursive List files recu...

pd4294 · 10-09-2020

Good Day!I am trying to get my 1941 to be about to allow reaching out.Lab Setup:[192.168.1.254 - PacBell Router - Goes to Outside]|[176.16.1.1 - Linksys Router - Emulates WAN Providing]|[176.16.1.2 - 1941 WAN Port, G0/0]{Internal to the 1941}[192.168...

pd4294 · 09-12-2020

I have an SG350-28P I am trying to configure as follows:VLAN 1 - DefaultVLAN 100 - Customersand use the capability of the unit to provide DHCP for the VLAN 100.I've been able to configure the DHCP, but how do I associate the DHCP pool to the VLAN 100...

pd4294 · 10-13-2020

A variety of USB Flash Drives. 4GB, 8GB, and 16GB.I had formatted one of the 16GB drives to have a 4GB FAT16 partition, based on what I had read on another post.the flash drives work fine in a G350 switch.

pd4294 · 10-13-2020

Thank you!This worked!

pd4294 · 10-12-2020

thank you!I will let you know. the pillow is fast approaching my head and I will contend with things tomorrow.

pd4294 · 09-15-2020

Thank you Gents.Maybe I should have been a little more clear. I want use the DHCP server functionality on the SG350 for my VLAN. This way, I will be able to isolate the VLAN of the customer from the public area. I will go digging through the PDF post...

Member Since	‎09-10-2020 01:52 PM
Date Last Visited	‎11-08-2020 08:46 PM
Posts	7

User Statistics

User Activity

USB Port Not Working - 1941

"Simple" Config Issue - 1941 Router

SG350 - Associating DHCP with VLANs

Re: USB Port Not Working - 1941

Re: "Simple" Config Issue - 1941 Router

Re: "Simple" Config Issue - 1941 Router

Re: SG350 - Associating DHCP with VLANs