VLAN configuration

[arun panengal]

4331 router ,

vlan 

command is un recognized from the global configuration mode.

Unable to create VLANS.

only

vlan-autoconfig 

command is available

[paul driver · Accepted solution]

Hello

This is a router not a L3 switch, if you want to using dot 1 tagging then i would say you need to apply sub interfaces

Example:

int x/x
Description vlan 1
ip address xxxxxx



int x/x.2
Description vlan 2
encapsulation dot1q 2
ip address xxxxxx



int x/x.3
Description vlan 3
encapsulation dot1q 3
ip address xxxxxx

etc..

[Translator]

Wet wireless column configuration

[balaji.bandi · Accepted solution]

4331 is Router, so it has routing features, until you have any Module (HWIC)Layer 2 switch port, the command not work ?

what are you trying to do ?

[arun panengal]

Thanks much.Yes this was the issue. there was no layer 2 module. Thank you very much.

[Translator]

vlan-autoconfig 

[Translator]

Thank you for your help!