01-19-2011 06:50 PM - edited 03-04-2019 11:08 AM
How do you conf the L3 switch so that wokstation 1, 2 and 3 can talk to each other with the following information?
VLAN A) X.Y.123.128/255.255.255.192
VLAN B). X.Y.123.9/255.255.255.248
VLAN C) X.Y.123.0/255.255.255.252
Wks1) ip: X.Y.123.132
Wks2) ip: X.Y.123.10
Wks3) ip: X.Y.123.2
Need to be able to ping and access to/from Wks1, Wks2 and Wks3.
01-19-2011 08:05 PM
Are you a student? Are you trying to get your homework done by others?
01-19-2011 08:27 PM
just want to learn...
I just got a few appliances to play with...
Can you help?
01-20-2011 03:11 AM
Hi,
VLAN A) X.Y.123.128/255.255.255.192
VLAN B). X.Y.123.9/255.255.255.248
VLAN C) X.Y.123.0/255.255.255.252
Wks1) ip: X.Y.123.132
Wks2) ip: X.Y.123.10
Wks3) ip: X.Y.123.2
on your L3 switch you must :
-put interfaces going to each wrk in the correct vlan: switchport mode access , switchport access vlan X
-give an ip address to int vlanX: int vlan x, ip address x.x.x.x "mask", no shut
-be sure ip routing is on: ip routing
then each wrk must have the ip add of int vlan as default gw
Regards.
Alain.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: