05-09-2006 12:40 PM - edited 03-03-2019 12:38 PM
Here's my setup:
Office A has a 3500 switch and a 1721 router that is point to point-ed to a 1721 in Office B. Router B is connected to another 3500 series. Then, there is another 1721 connected to the same switch which then goes onto the internet.
I have 2 VLANs created on switch B - one for data and one for voice. I need the VLANs to propogate to network A so that I can get a VoIP system configured.
What, if anything, needs to be done on routers A and B in order for this to work?
SOrry if this has been asked - I searched and coulb't find it.
Thanks,
Paul
05-09-2006 03:24 PM
You want briding control protocol (BCP), it essentially allows PPP links to carry Dot1q tagged packets. Check it out here:
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080437e76.html
05-10-2006 06:41 AM
Thanks for the link! I looked everywhere for that before posting... It's exactly what I needed.
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide