VPN -crypto isakmp

[godwinagaba]

I'm in the process of configuring VPN and when i get to configure crypto, the router 1921 does not accept crypto isakmp command .

Could it be a probelm with security license?

Help

Agaba G

[Latchum Naidu]

Hi,

That could be a reason what IOS do you have.
You need to have the K9 bundle like the following one. c1900-universalk9-mz.SPA.151-4.M.bin
Contact your cisco partner to have complete info on how to order and all.

Please rate the helpfull posts.
Regards,
Naidu.

[godwinagaba]

Thanks Naidu ,

Let me contact the vendor for details.

The response is helpful.

[Latchum Naidu]

Hi agaba,

You are most welcome and always this great CSC forum and people will always help you in troubleshooting.
You can come at any time with a issue we will help you.
And please keep in mind to rate the all helpfull posts which will encourage others throught this program.

Please rate the helpfull posts.
Regards,
Naidu.

[sivakumar koottala]

Hi Naidu Sir,

i have same problem.

Router#show license all
License Store: Primary License Storage
StoreIndex: 0   Feature: ipbasek9                          Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0   Feature: securityk9                        Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None
StoreIndex: 1   Feature: datak9                            Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None
StoreIndex: 2   Feature: SSL_VPN                           Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: 0/0  (In-use/Violation)
        License Priority: None
StoreIndex: 3   Feature: ios-ips-update                    Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None
StoreIndex: 4   Feature: WAAS_Express                      Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None

Router#

Please suggest me for IPSec which license i have to activate.

[ปลาวาฬทราย RMUTT CPE IX]

After install license, does the router require reload?

[Pawan Raut]

Yes any additional feature if you install you need to reload router to take it effect

[lifayk-mo]

Hello.

I have  c1900-universalk9-mz.SPA.152-1.T1.bin. But there is no such a command also. Only crypto key and crypto pki are availible.

[Peter Paluch]

Hello Evgeny,

Naidu is correct - you need to verify if you have SECURITY license installed on your router.

Best regards,

Peter

[lifayk-mo]

How can I verify it? Can I do it by myself?

[Peter Paluch]

Hello Evgeny,

Sure. Check the output of the show license all command. I also suggest reading the following two documents (although they are lengthy):

http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/csa_overview.html

http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/csa_commands.html

Best regards,

Peter

[Latchum Naidu]

Hi agaba,

What is the update on this?
Looks you have got all posibile suggestions.
Please remember to rate all the helpfull posts which give value for the contributor efforts and also this encourage others throughout this great CSC.

Please rate all the helpfull posts.
Regards,
Naidu.