cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1279
Views
0
Helpful
2
Replies
roycemathew
Beginner

VRRP between Juniper SRX and Cisco

VRRP not forming between SRX and Cisco on MD5/Key-string/Key Chain. Any thoughts?

 

IOS - c2900-universalk9-mz.SSA.155-3.M1.bin

 

Junos: 15.1X49-D100.6

JUNOS Software Release [15.1X49-D100.6]

 


no key chain VRRP
!
key 0
!
key-string TEST
!

interface GigabitEthernet0/0.334
!vrrp 1 authentication md5 key-chain VRRP
!vrrp 1 authentication md5 key-string TEST

!

1 ACCEPTED SOLUTION

Accepted Solutions

VRRP v3 doesnt support authentication.

View solution in original post

2 REPLIES 2
Georg Pauwen
VIP Expert

Hello,

MD5 uses port 51 for the authentication header, make sure that port is not blocked somewhere. Also, make sure you are running the same VVRP version on both the Cisco and the SRX.

Can you post the Juniper VRRP config ?

VRRP v3 doesnt support authentication.

View solution in original post