09-03-2011 04:01 AM - edited 03-04-2019 01:29 PM
R1-----------R2(PE)
| |
| |
| | eBGP
| |
| |
R3-----------R4(CE)
| |
| |
| VRRP |
| |
| |
| |
I want't to track the WAN ethernet interface.Currently primar router is R3 and secondary router is R4.
ethernet interface doesn't go down on router even if WAN media is down , so vrrp vrid 1 track interface gig1/0 doesn't work.
BFD and ip sla command doesn't work on my device.is there any other method so that my traffic will shift on R4.
Solved! Go to Solution.
09-03-2011 04:31 AM
Hi,
if you want to use secondary when primary fails using vrrp then you must use interface tracking
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvrrptk.html
Regards.
Alain.
09-03-2011 04:31 AM
Hi,
if you want to use secondary when primary fails using vrrp then you must use interface tracking
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvrrptk.html
Regards.
Alain.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide