VRRP ethernet tracking

[csc010854800]

R1-----------R2(PE)

   |             |

   |             |

   |             | eBGP

   |             |

   |             |

R3-----------R4(CE)

   |              |

   |             |

   |  VRRP  |

   |             |

   |             |

   |             |

I want't to track the WAN ethernet interface.Currently primar router is R3 and secondary router is R4.

ethernet interface doesn't go down on router even if WAN media is down , so vrrp vrid 1 track interface gig1/0 doesn't work.

BFD and ip sla command doesn't work on my device.is there any other method so that my traffic will shift on R4.

[cadet alain · Accepted solution]

Hi,

if you want to use secondary when primary fails using vrrp then you must use interface tracking

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvrrptk.html

Regards.

Alain.