i have this invalid vrid increasing with no clear reason
#show vrrp interface TenGigE0/0/0/0.500 statistics
Tue Oct 6 17:06:21.303 EGY
TenGigE0/0/0/0.500
Invalid packets:
Invalid checksum: 0
Unknown/unsupported versions: 0
Invalid vrID: 4626
Too short: 0
Protocol:
Transitions to Master 0
Packets:
Total received: 0
Adverts sent: 4624
Bad TTL: 0
Short Packets: 0
Failed authentication: 0
Unknown authentication: 0
Conflicting authentication: 0
Unknown Type field: 0
Conflicting Advertise time: 0
Conflicting Addresses: 0
Received with zero priority: 0
Sent with zero priority: 0
i configure the vrrp on both routers the both of them have invalid vrid and increasing
what could be the problem and how to solve it
R1 int conf
interface TenGigE0/0/0/0.500 ipv4 address 172.102.2.2 255.255.255.192
interface TenGigE0/0/0/0.500 encapsulation dot1q 500
router vrrp interface TenGigE0/0/0/0.500
router vrrp interface TenGigE0/0/0/0.500 address-family ipv4 vrrp 6
router vrrp interface TenGigE0/0/0/0.500 address-family ipv4 vrrp 6 priority 200
router vrrp interface TenGigE0/0/0/0.500address-family ipv4 vrrp 6 address 172.102.2.1
R2 int conf
interface TenGigE0/0/0/0.500 ipv4 address 172.102.2.3 255.255.255.192
interface TenGigE0/0/0/0.500 encapsulation dot1q 500
router vrrp interface TenGigE0/0/0/0.500
router vrrp interface TenGigE0/0/0/0.500 address-family ipv4 vrrp 6
router vrrp interface TenGigE0/0/0/0.500 address-family ipv4 vrrp 6 priority 100
router vrrp interface TenGigE0/0/0/0.500 address-family ipv4 vrrp 6 address 172.102.2.1
