Way to aggregate 2 DS3 other than multilink PPP ????

[mohamed-elsherif]

hi all

are there any way t to aggregate  2 DS3 other than multilink PPP , in way that can group this  2 unchannlized DS3s and work as a bundle interface.

[Giuseppe Larosa]

Hello Mohamed,

>> are there any way t to aggregate  2 DS3 other than multilink PPP

I would suggest to use them as two L3 parallel links

flow based CEF load balancing provides good results with usual traffic patterns

Hope to help

Giuseppe

[mohamed-elsherif]

dear Mr gisular

my problem actually that i have two 7200 router that connected through two DS3s one of them is VXR the other is NPE-g2 , the VXR router is connected to ADSL DSLAMs the other is connected to the Raduis server and the are already loading balancing using EIGRP , but the problrm is when the clients tries to connect they authenticate two times through two different interface which leads to wrong information on my radius , and when i used multiPPP

the CPU uitltization was very high on ,my router

now i\m searching for a way to load balance and in the same time use bundle interface that can make clients authenticate from same IP address as source interface

thanks alot

[Giuseppe Larosa]

Hello Mohamed,

I think a possible solution would be to force the source of radius packets to be for example a loopback interface

ip radius source-interface ?

this should make consistent the way they appear to the radius server

Hope to help

Giuseppe

[mohamed-elsherif]

hi Mr gisular

i think that would solve the problem thanks alot