11-11-2011 01:44 AM - edited 03-04-2019 02:14 PM
Hello,
I need to put a FWSM and a line card WS-X6148A-GE-TX to a router 7606. The FWSM version is 3.2(13). The router is running IOS 12.1(18)SXD3. The Cisco document here says the required IOS for router 7606 is 12.2(18)SXF or higher. I have downloaded the IOS 12.2(33)SRD4 and loaded it to the flash card. When I turn the router on, it doesn't load the new IOS and goes to rommon.
Can you advise which IOS I should use to make the router 7606 work and accept the FWSM.
Thanks,
Solved! Go to Solution.
11-11-2011 06:33 AM
Hi Dao,
If the document said that the ios version must be 12.2(18)SXF or higher to support FWSM function.
Please follow the steps of ios upgradation inorder to get the router load with new ios image which you have already put in the flash.
Please rate the helpfull posts.
Regards,
Naidu.
11-11-2011 06:33 AM
Hi Dao,
If the document said that the ios version must be 12.2(18)SXF or higher to support FWSM function.
Please follow the steps of ios upgradation inorder to get the router load with new ios image which you have already put in the flash.
Please rate the helpfull posts.
Regards,
Naidu.
12-17-2012 07:10 PM
thank all,
I upgraded IOS for my customer up to: s72033-ipservices_wan-mz.122-18.SXF17b.bin, and the router 7600 could load all card as:
------------------ show module ------------------
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 2 port adapter Enhanced FlexWAN WS-X6582-2PA JAB08530450
2 6 Firewall Module WS-SVC-FWM-1 SAD0649035P
3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL1527J0JQ
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD08400908
But, now our customer want to use IPsec to encrypto packets on the link between sites in their company.
Please help me...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide