Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
We have configure Sync E between ASR 9010 and ASR 903, but frequency not sync
This is configure on 2 ASR:
ASR 9010 (T0/0/1/1) ----- ASR 903 (T0/1/8)
ASR 9010
Configuration Sync-E on ASR9010:
!
frequency synchronization
quality itu-t option 1...
Hi all,I have a customer want to POC Cisco OLT ME4600 series, so I must to discuss with our customer about Cisco OLT ME 4600 configuration guide, example:- Other ONT vendor may be connect to Cisco OLT ME4600?- how to configure OLT ME4600 to test serv...
hi all,My customer has a Controller 5760-50, and 30 APs. My customer wants to add 100 APs to this controller.I know that: Controller 5760-50 only add maximum 50 APs...How do I resolve this problem? (buy license or buy other controller can manage over...
hi all,Our Customer used Distribution switches are DistSW4507-01 and DistSW4507-02. These switches used HSRP with Dist-02 is active, Dist-01 is standby.But, the past few days then the CPU of Dist-01 increase to 60%, you can see result as follow:DistS...
Hi all,I have just buy a 10G card for Cat 6513, these are information:PDCMSFC-1>sh moduleMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ ----------- 2 ...
hi InayathUlla Sharieff,These are the result of the commands:DistSW-4507-01#show platform cpu packet statistics Packets Dropped In Hardware By CPU Subport (txQueueNotAvail)CPU Subport TxQueue 0 TxQueue 1 TxQueue 2 TxQueue 3---------...
Normal,CPU of the Dist-01 is very low as follow:DistSW-4507-01#sh processes cpu sorted | exclude 0.00CPU utilization for five seconds: 6%/0%; one minute: 7%; five minutes: 8% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 41 ...
