cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1380
Views
5
Helpful
3
Replies

Why my route rip is not working

Mordecalex
Level 1
Level 1

Hi, im working and practicing with rip version 2 none of my topologies are forwarding beyond of themselves. here is the file. i would appreciate any help

1 Accepted Solution

Accepted Solutions

Hello,

2 things. You need to turn off

auto summarization

under the router rip process (see below) and your G0/2 interfaces connecting to the switch to form neighbors is all the same IP address. They cannot be the same IP because then the router thinks the update is coming from itself and will discard it.

R0-G0/2: ip address 10.0.0.1 255.255.255.0

R1-G0/2: ip address 10.0.0.2 255.255.255.0

R2-G0/2: ip address 10.0.0.3 255.255.255.0

Also make sure they are in the same subnet with appropriate mask.  Since you don't have the 10.0.0.0 network anywhere else I would just use

255.255.255.0

Under the Router RIP configuration turn off the

auto summarization
conf t

router rip

no auto-summary

Hope that helps

-David

View solution in original post

3 Replies 3

Hello,

2 things. You need to turn off

auto summarization

under the router rip process (see below) and your G0/2 interfaces connecting to the switch to form neighbors is all the same IP address. They cannot be the same IP because then the router thinks the update is coming from itself and will discard it.

R0-G0/2: ip address 10.0.0.1 255.255.255.0

R1-G0/2: ip address 10.0.0.2 255.255.255.0

R2-G0/2: ip address 10.0.0.3 255.255.255.0

Also make sure they are in the same subnet with appropriate mask.  Since you don't have the 10.0.0.0 network anywhere else I would just use

255.255.255.0

Under the Router RIP configuration turn off the

auto summarization
conf t

router rip

no auto-summary

Hope that helps

-David

Thanks David! Your answer solved my problem! btw, my mask

255.255.255.248

doesnt work but

255.255.255.0

works?

Your mask of

255.255.255.248

would have worked since it would allow for 6 hosts and you only needed 3 (1 for each router). But you still needed to make the IPs unique. I just used the /24 of

255.255.255.0

as an example.

Review Cisco Networking for a $25 gift card