06-28-2005 05:19 AM - edited 03-03-2019 09:55 AM
hello, I have a problem with my xot/translate configuration. I have a customer witch sends the data in XoT. what i will do is unpack the XoT and then to translate the x25 data to TCP. I ve found a configuration exaple witch says that this should work. whit the debug command deb x25 all, deb translate, deb pad I can see nothing.
Below is my configuration !
version 12.3
service pad from-xot
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
service compress-config
no service dhcp
!
hostname tpkg2f
!
boot-start-marker
boot system flash:c3745-js-mz.123-9b.bin
boot-end-marker
!
logging buffered 64000 debugging
no logging console
!
clock timezone met 1
clock summer-time met recurring last Sun Mar 2:00 last Sun Oct 2:00
no network-clock-participate slot 1
aaa new-model
!
!
aaa authentication login default group tacacs+ line
ip subnet-zero
!
!
ip tftp source-interface FastEthernet0/0
no ip domain lookup
!
no ip bootp server
ip cef
!
x29 profile MIGROS 1:0 2:0 3:0 4:2 5:0 6:0 7:0 8:0 9:0 10:0
!
x25 routing
!
!
!
interface FastEthernet0/0
no ip address
speed 100
full-duplex
!
interface FastEthernet0/0.866
description tpkg2f-tpkg1u-Fa6/46 , Anschluss KG VPN IE POST
encapsulation dot1Q 866
ip address XXX.XXX.XXX.XXX 255.255.255.224
no ip proxy-arp
ip accounting output-packets
ip nat inside
standby 3 ip XXX.XXX.XXX.XXX
standby 3 priority 105
standby 3 preempt
standby 3 authentication 43j1q36Q
standby 3 track FastEthernet0/1 20
!
interface FastEthernet0/1
no ip address
speed 100
full-duplex
!
interface FastEthernet0/1.504
description tpkg2f-tccc03-Fa6/4 , Anschluss Cablecom Migros
encapsulation dot1Q 504
ip address xxx.xxx.xxx.xxx 255.255.255.224
no ip proxy-arp
ip accounting output-packets
ip nat outside
ntp disable
!
interface FastEthernet1/0
no ip address
shutdown
duplex auto
speed auto
!
ip nat inside source static 172.19.246.220 xxx.xxx.xxx.xxx
no ip http server
ip classless
ip route 172.19.246.220 255.255.255.255 xxx.xxx.xxx.xxx
ip route xxx.xxx.xxx.xxx 255.255.255.0 xxx.xxx.xxx.xxx
ip tacacs source-interface FastEthernet1/1
!
!
translate x25 .* profile MIGROS tcp 172.19.246.220 port 8030 stream quiet swap
!
!
!
!
!
line vty 0 4
vacant-message ^CC
Your L O G I N T I M E has expired!
If you need my services again, hit <RETURN> to call me back.
^C
line vty 5 10
transport input all
07-04-2005 06:02 AM
This below link help yo to configure the internal packet assembler/disassembler (PAD) facility to make connections with remote devices over the X.25 protocol.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide