07-29-2015 06:56 AM - edited 03-05-2019 01:58 AM
Is zero touch deployment with usbflash, as described in this document, supported in the 15.4(x)M releases.
I got it working with a C887VA-K9 running 15.4(1)T1 but it doesn't seem to work on a 887VAG-4G-GA-K9 running 15.4(3)M1
07-29-2015 01:50 PM
Hello rbinkhorst,
Thank you for visiting the Cisco Support Community!
Unfortunately, I don't believe Zero Touch Deployment with USB flash is supported by products running the 15.4(x)M firmware releases. For more information on Zero Touch Deployment or other web services management agents, please click here.
If this post was helpful, please remember to mark this question as resolved to help others in the community. If you have any further questions regarding Cisco’s small business products, please do not hesitate to ask!
Best,
LP
07-29-2015 11:46 PM
Hello Lparikh,
thanks for your reply, the page/document you refer to doesn't provide any information regarding ZTD with usbflash.
Is there any document regarding the firmware/platforms supporting this feature (ZTD with usbflash), we use this for deployment of 500+ routers.
Meanwhile I also tested it with 15.5(2)T1 on the 887VAG-4G-Ga-K9, doesn't work....
07-30-2015 09:43 AM
Hello rbinkhorst,
I did not link the document regarding Zero Touch Deployment with usb flash, since it is the same one you linked in your original post. The other link above is for additional information. Unfortunately, I do not have sufficient resources to test this particular problem to the proper extent, my apologies. I suggest either waiting until someone who has the resources replies, or calling Cisco and opening a case with them to solve this problem.
If you have any further questions regarding Cisco’s products, please do not hesitate to ask!
Best,
LP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide