802.1X support for wired client on Meraki MX68-HW

[AKS Cisco]

We are planning to buy Mraki MX68-HW for our small branches which can cater wired connectivity requirement for 5-6 users easily with 10 LAN ports ( 2xPOE+) has to offfer. So wanted to check if MX68 is capable of performing 802.1X for wired client connected on its LAN ports in access mode? We have internal Cisco ISE server which we use for authenticating wired and wireless clients.

[Kanan Huseynli]

Hi,

based on this document it is supported on MX68(C/W). I've not gone the entire document, so please read carefully for the caveats or limitations.

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/MX_Access_Policies_(802.1X)