cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Choose one of the topics below for SD-WAN Resources to help you on your journey with SD-WAN

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.

181
Views
0
Helpful
1
Replies
Highlighted

Cisco SDWAN Controller with two transport vpn

Hi all.

Is it posible to deploy sdwan controller with two transport vpn / vpn 0 ? Is there any documentation about this? I cannot find any in sdwan controller, only in sdwan vedge with two vpn 0.

Thank you.

 

Best regards,

Lazuardi Nurfaiz

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Cisco SDWAN Controller with two transport vpn

Hi,

 

looks like there is no such configuration. I tested in vBOND it accepts 2nd interface (with tunnel config). But since vBOND is vEDGE actually, it may be just cosmetic config.

vSMART and vMANAGE have 2interfaces only (one for mgmt , one for control).

 

Regards,

View solution in original post

1 REPLY 1
Highlighted
Beginner

Re: Cisco SDWAN Controller with two transport vpn

Hi,

 

looks like there is no such configuration. I tested in vBOND it accepts 2nd interface (with tunnel config). But since vBOND is vEDGE actually, it may be just cosmetic config.

vSMART and vMANAGE have 2interfaces only (one for mgmt , one for control).

 

Regards,

View solution in original post