07-08-2020 10:46 PM - edited 07-09-2020 03:51 AM
hi Guys,,
Hope you can help me.
Im building my SDWAN Lab on GNS3 and i encounter this Error code. my vmange and vsmart is not accepting my vEdge
i attached the snip of my control connection
07-09-2020 05:18 AM
Hello,
Usually this means the vsmart and vmanage don't recognize the SN of the vedge as valid. If you go to the vedge and run "show control local-properties" it should give you a chassis number and a serial number. Then go to the vmanage and vsmart and run show control valid-vedges and see if the vedge info is in the list.
If it is not, you can try going to your vmanage GUI and going to configuration -> certificates and making sure the device is in this list. If it is, click "send to controllers" in the top left to try and get them to re-sync.
Hope that helps!
07-09-2020 07:00 AM
07-09-2020 07:25 AM
Hi,
what @brselzer noted is correct. But if you will still have problem ,then you most probably checked CSR properties in vmanage>administration>controller certificate authorization. If you checked then Organization field should be "vIPtela Inc".
Looks like it is bug. If you deploy CSR1k as cEDGE, it will totally don't work. You should uncheck CSR properties section.
HTH,
07-09-2020 10:49 PM - edited 07-09-2020 10:51 PM
on my vedge if i type show certificate installed this is what i saw.
Installed device certificates
-----------------------------
Certificate:
Data:
Version: 1 (0x0)
Serial Number: 793904309 (0x2f5204b5)
Signature Algorithm: sha256WithRSAEncryption
Issuer: C=US, CN=ecc9cf86-a786-4b80-91e8-aee9d231ce11, O=Viptela
Validity
Not Before: Jul 9 11:13:03 2020 GMT
Not After : Jul 7 11:13:03 2030 GMT
Subject: C=US, ST=California, L=San Jose, OU=VST_DemoLicense - 320987, O=Viptela LLC, CN=vedge-32348a7a-0f3a-5ec8-c327-41aeea3f3753-0.viptela.com/emailAddress=support@viptela.com
is there a work around to fix this bug?
07-10-2020 05:02 AM
Hello,
Can you clarify what the issue is with the above output? Looks like the cert is valid.
07-11-2020 05:46 PM
My vEgde is not forming a connection to my vSmart and vManage. i attached a screenshot of my control connection history on the original post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide