CSR1k sdwan image ,17.x

[Kanan Huseynli]

Hi there,

I want to test new features on IOS XE SDWAN 17.x version. Although release notes says that, CSR1k also supported for sdwan, there is no 17.x version with IOS XE SDWAN supported commands. In https://software.cisco.com/download/home/286323714/type

]page I see 2 options: IOS XE and IOS XE SDWAN. But latter option has only 16.x version,not new 17.x.

I have download 17.x from regular option (IOS XE), just for testing, as expected there is no sdwan related commands. Could anyone clarify this?

Thanks in advance,

[Karthik Kumar Thatikonda · Accepted solution]

Hi Kanan,

Please check this link for 17.3.1a. 

https://software.cisco.com/download/redirect?i=!y&mdfid=286323714&softwareid=282046477&release=Amsterdam-17.3.1a&os=&beta=n

Can you paste the output of 

Device# show version | inc operating

If it displays Autonomous follow this link to change the image to Controller-Managed. Then you must see the sdwan commands.

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/install-upgrade-17-2-later.html

[Kanan Huseynli]

Hi,

Thank you very much!)