Dears, It is to inform that i am installing ios xe 16.12.2r on isr4321 but while boor process it shows message that "ios not supported 16.12.2r" . What could be reason and how i can resolve it?? Waiting for reply and thanks BR:
Forum Posts
Looking for advice why the control plane is not up on vmanage and vbond vmanage# show control local-propertiespersonality vmanagesp-organization-name "XXXXX"organization-name "XXXXX"certificate-status Installedroot-ca-chain-status Installedcertificat...
I was under the impression that vManage is/can be the collector for traffic monitoring/etc?vManage enabled Data Stream is flow collector?
Hi, It's supposed that NAT tracker on cEdge (IOS-XE SDWAN) feature is in the roadmap to be supported, does anyone know when it will be available? is it going to be on next release? Thanks!Enrique
Hi guys, The vManage comes with a list of applications and applications family list that we can leverage to do App aware routing and appears to me that the application visibility that the vmanage has, comes from the same list. Now, what happends if I...
I have a vEdge-1000 that I need to test the port ge0/2 on. My plan is to just duplicate that interface on say ge0/6. This is a WAN ckt and has a sub-interface of .173. Will the vEdge allow me to add the test interface(s) ge0/6 & ge0/6.173 with the...
Hello All,I want to confirm for how long the data plane tunnel can survive to forward user traffic when the CONTROL connection down? I am experiencing traffic disruption when I lost the connection to controller due to link problem (or even controller...
Is it possible for the following to work? Basically I'd like to see if its possible to use a cEdge as an internet gateway for the underlay. TopologyInternet---DMZ---cEdge-----MPLS network ----- multiple vEdges Ideally, the internet facing cEdge inter...
- My objective is to use loopback interfaces as the tunnel interface. But, when attempting to bind the loopback, I get the above error. Screenshot attached.--- I'm trying this out in our lab staging environment with a CSR1000v image and vManage relea...
Configuring a Viptela vEdge requires a numeric "site-id".Is there support for providing a centralized name service to assign meaningful names to the numeric site IDs and making it available as a REST service?
Hello,I am trying to attach a Centralized Route policy inbound to an SD-WAN ISR4331 BGP neighbor configuration but i get an error: Server Error: Illegal reference. Is this a bug or there might be something wrong with my BGP feature template? When i c...
Hi,I'm on the Security team and was provided the below devices for security evaluation by our network group.Question for the Zone Based Firewall (ZBFW) on this hardware:How do you create ZBFW Rules for Direct Internet Access (DIA) in vManage?These ru...
Hi Experts, Our company have about 20 branch office around the city. They may have some duplicate addresses because of indivdually management. We would like to deploy cisco SD-WAN solution for our branch and HQ. Does the SD-WAN solution can solve th...
Hello- We have a setup where each site as dual cEdges and each cEdge has a DIA link. I would like to use cEdge1 for all internet access i.e google.com and only use 2nd link in case the first link is down. Is there a way to perform link failure detect...
I started: https://developer.cisco.com/learning/tracks/sd-wan_programmability Module 1 and 2 issue 1:sandboxsdwan.cisco.com is not reachable anywhere from inside Cisco issue 2: With 19.2 release of SDWAN it is required to have a session token and a...
