Failed to add vBond/device Failed to to get SSH session

[Neaz_Arefin]

Hi, I'm having error message while adding the vBond controller from the browser, as "failed to add device /failed to get SSH session"

[balaji.bandi]

Does the vManage have reachability to vBOND, what subnet they are ?

[Neaz_Arefin]

Thanks for your response , Yes they have reachability. VPN 512 , 192.168.100.X I'm using as management network and
vpn 0, 192.168.200.X is the transport. I've attached my Lab pic for your better understanding 

[balaji.bandi]

as it says SSH issue, are you able to login to vBOND using SSH ? make sure you set up admin user and password (to be used to add in vManage)

check the logs in vBOND console, as i see you using eve/Pnet for this lab.

[Neaz_Arefin]

I'm learning the SD-Wan, do you have any prop that I can follow or check ? as I tried many ways and I failed 

[balaji.bandi · Accepted solution]

If you using eve follow below step by step :

https://www.youtube.com/watch?v=F_ioroNRoAI

[Neaz_Arefin]

Thanks, tons of appreciation 

[weissursula6]

Transport vpn and is used for WAN connectivity....vpn 512: Management vpn and used for OOBM connectivity.....vpn 1-511: Service vpn and can be used for internal connectivity with LAN, DMZ zone or other LAN connectivity www.foodprocessoronline.com/cabbage-soup-diet-review/ 

[pasoltan]

looks like default admin/admin is rejected even if you do config->sys->aaa->user admin / pass admin.  Once changed the password for admin to something else, ssh TO the device worked. and vmanage 20.9.3.1 was happy to add it to the controllers. The vsyslog also didn't give any clues:

vbond VCONFD_NOTIFIER[27047]: %Viptela-vbond-system-5-NTCE-1400002: Notification: system-aaa-login-fail severity-level:major host-name:"vbond"