How to understand Decrypt, No Decrypt or Pass Through option in Cisco SDWAN TLS/SSL Profile?If you choose URLs, enter the following: VPNs TLS/SSL profile. Enter a name for the profile. Choose Decrypt, No Decrypt or Pass Through. Alternatively, yo...
Forum Posts
Hi i am working with an existing SDWAN deployment..I want to recive email alert when there is alarm triggered I mean TLOC down site down router down etc ..so first I have checked the configuration and came to know that Alarm notification is already e...
Dear all, I've been working a lot, lately, on the vmanage API and building a tool around it for monitoring purposes. Currently I'm implementing a lot of unittesting to improve the quality of my code. I thought that I had covered all cases with the lo...
Hello Experts, Has anyone experienced a problem with ISR 4K when the transport interface is a sub interface ?.. I have my transport interface to be configured as sub interface and I understand that I have to reduce the MTU by 4 byte. When I do the in...
I have two vManages in standalone and I wanted to make cluster, but after I added 2nd node to active vManage I'm getting error "vmanage server is not ready or temporarily unavailable" for 1 hourversion 20.9.1maybe does somebody know how it fix?
Hi team,I have a situation where vEDGEs are successfully coming up, but the CSR1KV on vManage GUI shows that "CSR FAILED" (this CSR means certificate signing request). What I see is CSR1k connects to vbond , learns vmanage IP, connects to it. But whi...
Hello All,I'm looking to retrieve data from vManage over to Power Bi. Has anyone tried this or has an idea on how I can achieve this?
I need to make backup way for internet access from one spoke to another, I made policy with tracker to it and it works, if I have some problems with internet in local spoke traffic goes to backup spoke, after that I needed to sent traffic from one s...
Hi team, We have problem after add device to device template. After that step we have received an error message show below. in the vmanager logs we can see: Error: Device vedge-C1111X-8P-SNXXXXXXXXXX is southbound locked
Dear Colleagues, I have tried to launch my new vManage version 19.2.4. Everything looks fine but when I try to login via GUI I receive the below picture. vManage-New# req nms all statusNMS application server Enabled: true Status: running PID:8773 f...
what would happen if all SDWAN Controller (Vbond,Vmanage,Vsmart) Certificates gets expired. would there be any impact of Edge devices traffic.
Hi, I am new to the multicast routing topics, but currently, I have the below setup:Setup (components of the network):R1(Router R1) on one side of the AWS VPC and R2(Router R2) on the other side of the VPC, Each router has one host (Ubuntu Server) be...
Hello so im new in this SDWAN Deploymentif i have 2 router sdwan as Internet Gateway connecting to Core switch using VRRP and then i create vrf 10 for service, in core switch i have another vlan that need internet access, do i have to create another ...
Hello, And:Can you set PBR with only source? And even with NAT?Lets say this demoInternet1 —— ASA —— inside_defaultInternet2 —— ASA —— inside_secretroute outside1 0 0 111.0.0.1 for default gatewaynat (inside_default,outside1) after-auto source dynam...
I was wondering if anybody has written an access-list for SD-WAN on an outside router where you own the outside router and traffic must pass-through the outside router to get to the SD-WAN Edge router. The access-list would be the typical outside acl...
