cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3734
Views
5
Helpful
8
Replies

Failed to add vBond/device Failed to to get SSH session

Neaz_Arefin
Level 1
Level 1

Hi, I'm having error message while adding the vBond controller from the browser, as "failed to add device /failed to get SSH session"


Capture2.JPG

1 Accepted Solution

Accepted Solutions

If you using eve follow below step by step :

 

https://www.youtube.com/watch?v=F_ioroNRoAI

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

8 Replies 8

balaji.bandi
Hall of Fame
Hall of Fame

Does the vManage have reachability to vBOND, what subnet they are ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Neaz_Arefin
Level 1
Level 1

Thanks for your response , Yes they have reachability. VPN 512 , 192.168.100.X I'm using as management network and
vpn 0, 192.168.200.X is the transport. I've attached my Lab pic for your better understanding 
SD-Wan Lab.JPG

as it says SSH issue, are you able to login to vBOND using SSH ? make sure you set up admin user and password (to be used to add in vManage)

 

check the logs in vBOND console, as i see you using eve/Pnet for this lab.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I'm learning the SD-Wan, do you have any prop that I can follow or check ? as I tried many ways and I failed 

If you using eve follow below step by step :

 

https://www.youtube.com/watch?v=F_ioroNRoAI

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Neaz_Arefin
Level 1
Level 1

Thanks, tons of appreciation 

weissursula6
Level 1
Level 1

Transport vpn and is used for WAN connectivity....vpn 512: Management vpn and used for OOBM connectivity.....vpn 1-511: Service vpn and can be used for internal connectivity with LAN, DMZ zone or other LAN connectivity www.foodprocessoronline.com/cabbage-soup-diet-review/ 

pasoltan
Cisco Employee
Cisco Employee

looks like default admin/admin is rejected even if you do config->sys->aaa->user admin / pass admin.  Once changed the password for admin to something else, ssh TO the device worked. and vmanage 20.9.3.1 was happy to add it to the controllers. The vsyslog also didn't give any clues:


vbond VCONFD_NOTIFIER[27047]: %Viptela-vbond-system-5-NTCE-1400002: Notification: system-aaa-login-fail severity-level:major host-name:"vbond"

 

Review Cisco Networking for a $25 gift card