cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
520
Views
0
Helpful
6
Replies

Getting a prefixes through service VPN, but not able ping.

tejaschopde1397
Level 1
Level 1

Hello, 

For testing purpose, i have created a overlay tunnel between site-5 to site-6. Though, i am getting a service vpn 10 route via OMP but unable to ping those prefix from site-6 Vedge devcie. Can i get a solution or suggestion if i missed something. 

Attaching CLI output of site-6 for reference. 

6 Replies 6

there is not attachment 

MHM

@MHM Cisco World , attached as in below response. 

Hello,

Are you pinging them within VPN 10? By default the ping is sourced from VPN 0.

Also as @MHM Cisco World mentioned there is no attachment.

-David

Hello David,

Yes, pinging with own vpn segment i.e. VPN 10. Apologized, previously attachment gone missed. FYI, as enclosed. 

 

 

582e8e2d-6af0-44df-8c3f-d682678d1659.PNG

 

 

Screenshot 2024-02-29 180040.png

share this 
show bfd session | tab 
show tunnel stat
show omp routes 172.168.16.0/24 detail 

MHM 

Hi,

share show run vpn 1 and show ip route vpn 1 from both devices. Maybe you have return route problem

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

Review Cisco Networking for a $25 gift card