cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Choose one of the topics below for SD-WAN Resources to help you on your journey with SD-WAN

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.

273
Views
0
Helpful
1
Replies

new to networking. Help with pinging across a network

I am finding it impossible to ping across my network. I am extremely new to packet tracer and networking as a whole so i apologies if my question seems silly. I can ping between devices within each LAN individually. But i am unable for example to ping 192.186.1.3 from PC 192.168.0.3. when completing this command i am getting " destination host unreachable.

I think my mistake has something to do with my input for the routers RIP which is as follows:

192.168.0.0

192.168.1.0

192.168.2.0

192.168.3.0

192.168.4.0

192.168.5.0

192.168.6.0

192.168.8.0

192.168.9.0

192.168.11.0

 

192.168.0.0

default gateway is 192.168.0.1

192.168.1.0

default gateway is 

192.168.1.1

and so on 

 

1 REPLY 1
sdipippo
Cisco Employee

Hi dainatarleton33244,

Welcome to networking!

Try a traceroute from the PC0 ("tracert 192.168.1.2") and see where it stops. That will give you an indication about where the problem is, and you can then hone-in on that spot to continue troubleshooting.

Hope it helps!

Steve