09-15-2020 10:13 PM
What exactly is the difference between rollback configuration and rollback selective in SD-WAN commands?
Solved! Go to Solution.
09-21-2020 02:17 AM
It's simple. Selective will rollback only changes in the selected rollback id, but rollback configuration will rollback all changes before this configuration id. In the example below, rollback selective 2 - will not rollback changes in 0 and 1 ids (int ge0/5 shutdown):
vEdge1(config)# rollback selective 2 vEdge1(config)# show configuration vpn 2 router ospf area 0 interface ge0/5 network point-to-point exit exit ! ! no interface loopback2 ! vEdge1(config)# exit Uncommitted changes found, commit them? [yes/no/CANCEL] no vEdge1# conf t Entering configuration mode terminal vEdge1(config)# rollback configuration 2 vEdge1(config)# show configuration vpn 2 router ospf no area 1 area 0 interface ge0/5 network point-to-point exit exit ! ! interface ge0/5 no shutdown ! no interface loopback2 ! vEdge1(config)#
09-21-2020 02:17 AM
It's simple. Selective will rollback only changes in the selected rollback id, but rollback configuration will rollback all changes before this configuration id. In the example below, rollback selective 2 - will not rollback changes in 0 and 1 ids (int ge0/5 shutdown):
vEdge1(config)# rollback selective 2 vEdge1(config)# show configuration vpn 2 router ospf area 0 interface ge0/5 network point-to-point exit exit ! ! no interface loopback2 ! vEdge1(config)# exit Uncommitted changes found, commit them? [yes/no/CANCEL] no vEdge1# conf t Entering configuration mode terminal vEdge1(config)# rollback configuration 2 vEdge1(config)# show configuration vpn 2 router ospf no area 1 area 0 interface ge0/5 network point-to-point exit exit ! ! interface ge0/5 no shutdown ! no interface loopback2 ! vEdge1(config)#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide