Same network for Service Side NAT Pool on different VRF

[etalaveran]

Hi

It is possible to configure the same network for Service Side NAT pool but in different VPN/VRF?

Ex:

VPN 1

Inside Local : 10.0.100.0/24

Inside Global : 192.168.100.0/24

VPN 2

Inside Local : 10.0.101.0/24

Inside Global : 192.168.100.0/24

Thanks!

[MHM Cisco World]

Vpn vrf ? What you meaning ? 

But if i get this 

Vrf 1 have 10.0.0.0 

Vrf 2 have 10.0.0.0 no problem you can use it in case that each vrf go to different router not same one

[etalaveran]

In Cisco-Viptela SD-WAN, VPN is the same as VRF

What I mean is,  in the LAN side I have :

VPN 1 (= VRF 1)with 10.0.100.0/24 network . This network is translated (Service Side NAT)  to 192.168.100.0/24

VPN 2 (= VRF 2)with 10.0.101.0/24 network . This network is translated (Service Side NAT)  to 192.168.100.0/24

My question is : it's possible to use the same 192.168.100.0/24 for inside globlal(translated NAT address) in both VPN/VRF?

Regards