sd-wan vmanage

[R Manjunatha]

I am unable to find another hdc 100GB in this list, it's showing only one hdc that is 3GB only ...am using this controller in eve-ng , please let me know what could be the issue

admin connected from 127.0.0.1 using console on vmanage
Available storage devices:
hdc 3GB
1) hdc
Select storage device to use:

Welcome to Viptela CLI
admin connected from 127.0.0.1 using console on vmanage
Available storage devices:
hdc 3GB
1) hdc
Select storage device to use: 1
Would you like to format hdc? (y/n): y
mke2fs 1.43.8 (1-Jan-2018)
Could not open /dev/hdc: No medium found
Select storage device to use:

[balaji.bandi]

where did you downloaded the qcow2 images ?  or you conerted from Cisco image ?

you should see 2 files in the vManage folder as below (

virtiob.qcow2 will be 100GB

[R Manjunatha]

Yes...what is the command for this to create one more file..?

[balaji.bandi]

follow below guide :

https://www.eve-ng.net/index.php/documentation/howtos/howto-add-cisco-viptela-images-set/

[R Manjunatha · Accepted solution]

Thanks, balaji....

[Lenin Chabungbam]

Let me add on more point. in order to create this additional disk space, we need to go inside the vManage folder. In my case, i am using 19.2.0

Command.

cd /opt/unetlab/addons/qemu/vtmgmt-19.2.0
/opt/qemu/bin/qemu-img create -f qcow2 virtiob.qcow2 100G

cd
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

[OlanrewajuDipeolu2565]

Thanks Lehn, The problem was solved.