SDWAN - configuration push

[praveen-CCNP]

when I pushed the configuration from manage, it has been pushed the OSPF configuration but rolled back to default with in 3 mins without any errors.

please share your suggestions to troubleshoot. I am new to SDWAN

[praveen-CCNP]

I should turn off OMP at this stage ?

omp
no shutdown
graceful-restart
advertise connected
advertise static

[MHM Cisco World]

Omp between vedge and vsmart this not effect 

You use ospf under vpn0 which breaks connect from vedge to vmange and/or vsmart

There is something wrong in ospf you use for vpn0.

MHM

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/system-interface/ios-xe-17/systems-interfaces-book-xe-sdwan/configure-devices.html#id_119363

More about rollback timer 

MHM

[Kanan Huseynli]

Hi,

can you share topology? what is the purpose of OSPF in underlay if you have static route?

can you share show control connections and show control connection-history during issue is happening?

[praveen-CCNP]

After the NTP configuration on vmanage ,Vsmart ,vbond and Vedge . everything is working as expected

is it mandatory for pushing the config from vmange ? 

[praveen-CCNP]

vedge-1# show ospf neighbor
DBsmL -> Database Summary List
RqstL -> Link State Request List
RXmtl -> Link State Retransmission List
SOURCE DEAD
VPN IP ADDRESS INTERFACE ROUTER ID STATE PRIORITY TIMER DBsmL RqstL RXmtL
-------------------------------------------------------------------------------------------------------
0 10.1.1.1 ge0/0 1.1.1.1 full 1 34 0 0 0

vedge-1#