SDWAN Logging
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-08-2024 05:52 AM
I am trying to figure out why the logs for my SDWAN routers ONLY contain these type of FLOW LOG messages. I have my logging template configured with all the defaults and my syslog server and I used a CLI template as well. Any assistance would be much appreciated. Thanks!
service timestamps log datetime msec
logging buffered 512000
logging persistent size 104857600 filesize 10485760
no logging monitor
login on-success log
logging facility local6
logging source-interface Loopback1 vrf 100
logging host 10.81.77.50 vrf 100
May 8 08:17:04 xxx.xxx.xxx.xxx 1442305: May 8 12:17:03.286: %Cisco-SDWAN-xxxxxxxxxxx-FTMD-5-NTCE-1000026: FLOW LOG vpn-0 src: xxx.xxx.xxx.xxx/xxxxx dst: xxx.xxx.xxx.xxx/xxx proto: 6 tos: 0 inbound-acl, Implicit-ACL, Result: denyPkt SDWAN_SERV_TCP count: 1 bytes: 74 Ingress-Intf: GigabitEthernet0/0/0 Egress-intf: GigabitEthernet0/0/0
- Labels:
-
Other SD-WAN
-
SD-WAN Cloud
