I'm doing a SDWAN lab in and I'm unable to login into v-manage Gui using the username and password.
its keep on asking the username password again and again.
v-manage-version 20.9.3.1
if someone knows the solution, please help me with it.
system
host-name v-manage
system-ip 150.1.8.91
site-id 1
admin-tech-on-failure
no vrrp-advt-with-phymac
organization-name LAB-1
vbond 150.1.8.82
aaa
auth-order local radius tacacs
usergroup basic
task system read
task interface read
!
usergroup global
!
usergroup netadmin
!
usergroup network_operations
task policy read write
!
usergroup operator
task system read
task interface read
task policy read
task routing read
task security read
!
usergroup resource_group_admin
task system read
task interface read
!
usergroup resource_group_basic
task system read
task interface read
!
usergroup resource_group_operator
task system read
task interface read
!
usergroup security_operations
task security read write
!
usergroup tenantadmin
!
user admin
password $XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
!
ciscotacro-user true
ciscotacrw-user true
!
logging
disk
enable
!
!
ssh-server
cipher aes-128-192
kex-algo sha1
!
ntp
parent
no enable
stratum 5
exit
!
!
vpn 0
interface eth0
ip address 150.1.8.81/24
ipv6 dhcp-client
tunnel-interface
allow-service all
allow-service dhcp
allow-service dns
allow-service icmp
allow-service sshd
allow-service netconf
no allow-service ntp
no allow-service stun
allow-service https
!
no shutdown
!
ip route 0.0.0.0/0 150.1.8.1
!
vpn 512
interface eth1
ip address 150.1.8.85/24
no shutdown
!
ip route 0.0.0.0/0 150.1.8.1
!
