Choose one of the topics below for SD-WAN Resources to help you on your journey with SD-WAN
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.
Hi ,
Is viptela default behavior to copy inter DSCP to outer header ?
Walk through document , it only mentions the rewrite policy
Thanks
Solved! Go to Solution.
Hi Carl20849,
As per the Official Viptela training documentation this is what they say about that:
So based on this I would say yes, but you can do a simple test with a wireshark capture and two host PCs.
Best regards,
Please rate helpful posts
That's right. When user sets a dscp value, that's written to the outer IP header as well; unless a different code point value is mentioned in rewrite policy. Use the rewrite policy to write to outer IP header
Hi Carl20849,
As per the Official Viptela training documentation this is what they say about that:
So based on this I would say yes, but you can do a simple test with a wireshark capture and two host PCs.
Best regards,
Please rate helpful posts
That's right. When user sets a dscp value, that's written to the outer IP header as well; unless a different code point value is mentioned in rewrite policy. Use the rewrite policy to write to outer IP header