09-22-2019 06:42 PM
Hi ,
Is viptela default behavior to copy inter DSCP to outer header ?
Walk through document , it only mentions the rewrite policy
Thanks
Solved! Go to Solution.
09-23-2019 09:56 AM
Hi Carl20849,
As per the Official Viptela training documentation this is what they say about that:
So based on this I would say yes, but you can do a simple test with a wireshark capture and two host PCs.
Best regards,
Please rate helpful posts
09-23-2019 10:15 AM
That's right. When user sets a dscp value, that's written to the outer IP header as well; unless a different code point value is mentioned in rewrite policy. Use the rewrite policy to write to outer IP header
09-23-2019 09:56 AM
Hi Carl20849,
As per the Official Viptela training documentation this is what they say about that:
So based on this I would say yes, but you can do a simple test with a wireshark capture and two host PCs.
Best regards,
Please rate helpful posts
09-23-2019 10:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide