Solved: vManage dynamic list of nat rules

vitalijs,kulagins · ‎10-16-2023

Hello.

I have a challenge to create single feature template for vEdge routers where I can dynamicaly define static nat rules. Each vEdge will have different amount of hosts to be NATed.

Any ideas or suggestions? Template per device is bad option.

Thanks.

Kanan Huseynli · ‎10-17-2023

Hi,

define static NATs with variables and marked as optional. If device A has 10 nat rules, but device B has 5 nat rules ,then define 10 lines. Fill whatever needed, add "!" for the lines which are not needed (which means comment in CLI and ignored):

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.

View solution in original post

Kanan Huseynli · ‎10-17-2023

Hi,

define static NATs with variables and marked as optional. If device A has 10 nat rules, but device B has 5 nat rules ,then define 10 lines. Fill whatever needed, add "!" for the lines which are not needed (which means comment in CLI and ignored):

HTH,
Please rate and mark as an accepted solution if you have found any of the information provided useful.