10-09-2020 07:34 AM - edited 10-09-2020 06:51 PM
Hi There
I am getting the below error :
V manage login: FAILED: cdb _connect( CS , ST, ADDR, ADDRLEN, Error: system call failed (24): Connection refused, in function run, line 2401 )
this message is appearing after formatting the 100 gb hdb
v manage version is 19.2.3
10-09-2020 07:49 AM - edited 10-09-2020 06:49 PM
Welcome to Viptela CLI
admin connected from 127.0.0.1 using console on vmanage
Available storage devices:
hdb 100GB
hdc 3GB
1) hdb
2) hdc
Select storage device to use: 1
Would you like to format hdb? (y/n): y
After this it rebooted automatically then i am getting the above mentioned error.
can anyone help ?
10-12-2020 07:22 PM - edited 10-12-2020 07:25 PM
Hi,
Is this installation done from ESXI or KVM? Importing the vManage OVA initially will be configured with a 20GB disk for vManage system usage. Subsequently a 100GB disk should then be created for database. As for your case, you may need to review your system and make sure the vManage system is installed on the correct disk. Suspect that vManage may have installed itself on /dev/hdb but it's also used as data disk. The other thing that is suspect is also 3GB of disk space for system (/dev/hdc) seems too little, as minimally vManage provisions 20GB as mentioned.
01-06-2021 08:54 AM
What is the solution ? I am setting this on EVE-ng , facing this error Would you like to format hdc? (y/n): y
01-07-2021 10:32 PM
Fri Jan 8 06:08:08 UTC 2021: System Ready
viptela 19.2.1
vmanage login: admin
Password:
Welcome to Viptela CLI
admin connected from 127.0.0.1 using console on vmanage
You must set an initial admin password.
Password:
Re-enter password:
Available storage devices:
hdc3GB
1) hdc
Select storage device to use:
01-07-2021 01:22 AM
I use control-c on keyboard and the error goes away . Is that a right method ?
03-24-2021 11:57 PM
No, you need to select teh storage fro database. The common use is 100GB in a new disk
11-08-2021 12:50 AM
has anyone experience this, my vmanage keeps on rebooting. installed in Eve-NG, vmware workstation player - OVA
vManage login: fail: klogd: can't change to service directory: No such file or directory
FAILED: cdb_connect(cs, st, addr, addrlen), Error: Bad protocol usage or unexpected retval (21): Access check failed, in function run, line 2558
FAILED: cdb_connect(cs, st, addr, addrlen), Error: Bad protocol usage or unexpected retval (21): Access check failed, in function run, line 2558
FAILED: cdb_connect(cs, st, addr, addrlen), Error: Bad protocol usage or unexpected retval (21): Access check failed, in function run, line 2558
FAILED: cdb_connect(cs, st, addr, addrlen), Error: Bad protocol usage or unexpected retval (21): Access check failed, in function run, line 2558
10-15-2024 03:22 AM
can you help me fix same error
11-08-2021 01:11 AM
did you managed to resolved this issue, i've got the same error.
03-29-2022 05:21 PM
Anyone has solution for this problem??
vManage login: fail: klogd: can't change to service directory: No such file or directory
FAILED: cdb_connect(cs, st, addr, addrlen), Error: Bad protocol usage or unexpected retval (21): Access check failed, in function run, line 2558
04-09-2022 07:25 AM
hello, did you solve this issue? i've got the same error
10-27-2023 08:52 AM
Hello, has anyone resolved this issue? I'm having the same issue with vManage in eve-ng constantly rebooting
07-23-2024 03:17 PM
Could you please share the Vmanage image file to install for my labs? i do not have service contract so cisco doen's allow download without it. Thanks.
09-17-2024 03:29 PM
I had this exact same issue but in my case I had all my nodes powered on from a saved topology, all devices had default config. What enabled me to successfully install my vManage node was to power off all nodes and start from the beginning with the vManage.
My guess is that for what ever reason, the nodes just cant operate normally if their all powered on at the same time so doing them one at a time (maybe even 2?) seemed to work for me.
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide