cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
334
Views
0
Helpful
6
Replies
Highlighted
Beginner

stealthwatch ad integration with a photo?

hi experts one question about the ad integration

now it's partially working but the client have a doubt about the  photo section

it's possible to put a photo of the ad users in that section? like in the snapshot that i uploaded?

i hope you can give me some insights about, best regards

 

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: stealthwatch ad integration with a photo?

I recommend opening TAC case, if you already have an issue.

I only see the issue in the release note is SWD-12337 in 7.1.1:

Fixed an issue where Active Directory configuration would not accept more than one Domain Controller. (LSQ-4122/4161/4175)

 

But it looks not related to your problem. So please open TAC.

View solution in original post

6 REPLIES 6
Highlighted
Cisco Employee

Re: stealthwatch ad integration with a photo?

Yes, you can get a photo image from AD.

Highlighted
Beginner

Re: stealthwatch ad integration with a photo?

Hi kyoshiik thanks for the reply

we already have it connected with the AD with stealthwatch version 7.0 patch13

but is going to be upgrade to 7.2 

from the AD perstective do we need to make something special? or it works with a stealthwatch specific version?

thanks for your time, best regards

Highlighted
Cisco Employee

Re: stealthwatch ad integration with a photo?

I checked the release note of 7.1/7.2 and internal TAC cases but there is no special work or issue for upgrading until now.

AD integration should be kept when SMC upgrade from 7.0 to 7.2.

If you have any concerns about upgrading, please contact TAC team, they have enough knowledge to support you.

Highlighted
Beginner

Re: stealthwatch ad integration with a photo?

thanks about the reply

but when you configure the ad integration it's simple and pretty straightforward, but i mean about

with the AD because i have some troubles about with the ad integration some users shows data like email and those AD stuff and another users don't even in the same group

But if you get it work in the AD side you should not have any problems in the stealthwatch side?

Highlighted
Cisco Employee

Re: stealthwatch ad integration with a photo?

I recommend opening TAC case, if you already have an issue.

I only see the issue in the release note is SWD-12337 in 7.1.1:

Fixed an issue where Active Directory configuration would not accept more than one Domain Controller. (LSQ-4122/4161/4175)

 

But it looks not related to your problem. So please open TAC.

View solution in original post

Highlighted
Cisco Employee

Re: stealthwatch ad integration with a photo?

Apologies, my post was wrong. Tac team contact me it’s incorrect. It looks we can see user photo in the user information page but SMC doesn’t get user photo data from AD. Sorry again.