Implementing Cisco ACS Radius with Huawei Quidway LAN Switch S5600

[haider_it]

I had a problem to implement Cisco ACS radius server with Huawei switches

I made some Google searches and didn't find any article covering this specific issue

so i arranged some configuration steps and it was working successfully using Cisco ACS v 4.2 and the client as Huawei quidway S5600

the attached file showing the basic steps.

I still have problem how to import the commands log and accounting packets using TACACS+ or how to implement HWTACACS to achieve this puprose

regards

Haider Alshami

[David Marquez]

   Hello my friend, 

  I would like to know if there is any chance to authenticate a Huawei switch with my ACS v4.2.

   It could be authenticated by Radius or TACACS. ???

  When I try to config the ACS with the option "Authenticate Using" i got this.

TACACS+ (CISCO IOS)

RADIUS (CISCO AIRESPACE)

RADIUS (CISCO AIRONET)

RADIUS (CISCO BBSM)

RADIUS (3COMUSR)

RADIUS (CISCO IOS/PIX 6.0)

RADIUS (CISCO VPN 3000/ASA/PIX 7.X+)

RADIUS (CISCO VPN 5000)

RADIUS (IETF)

RADIUS (ASCEND)

RADIUS (JUNIPER)

RADIUS (NORTEL)

RADIUS (Ipass)

   Which one Do I have to select to authenticate a Huawei Switch.