Dear Professionals
I have
4507R + 2 X SUPII_Plus + cat4000-i9s-mz.121-19.EW1.bin
Following dump seems to be not configured correctly to redundancy.
What can I do to fix this problem.
------------------ show running-config --------------
.....
!
redundancy
mode rpr
main-cpu
auto-sync startup-config
auto-sync standard
!
.....
-----------------------------------------------------
7507R_SUPII_Plus#show redundancy stat
my state = 13 -ACTIVE
peer state = 1 -DISABLED
Mode = Simplex
Unit = Primary
Unit ID = 1
Redundancy Mode (Operational) = RPR
Redundancy Mode (Configured) = RPR
Split Mode = Disabled
Manual Swact = Disabled Reason: Simplex mode
Communications = Down Reason: Simplex mode
client count = 4
client_notification_TMR = 60000 milliseconds
keep_alive TMR = 9000 milliseconds
keep_alive count = 0
keep_alive threshold = 18
RF debug mask = 0x0
7507R_SUPII_Plus#redundancy force-switchover
There is no STANDBY present. Failed to force switchover
Best Regards