Server Networking

We are attempting to configure a DLSW network that will be using at the host location a 3640 with 3 inside ethernet connections and one frame relay out. The 3 ethernet connections are for 2 SNA and one TCP connection from an AS/400. The first SNA con...

Is there a limit on the number of DLSw+ remote peers that can be terminated on the same router?Would it be OK to terminate approx. 800 DLSw+ remote peers on a Cisco 2612 router with 64MB DRAM and 16MB Flash?Are there any relevant URLs that discuss li...

Is it true that Cisco has declared 3661(AC) multiservice router obsolute? If it is true which region are they obsolute? Can a Cisco 3745 multiservice router work in place of 3661(AC). How many asynchronous serial interfaces can it have?

my topology like thisE0---R1----ISDN-----R2----E0R1E0, 10.1.1.1/24BRI0 192.168.0.1/24R2E0 10.2.2.2/24BRI0 192.168.0.2/24use static route on R1 and R2for dlsw configurationR1dlsw local peer-id 10.1.1.1dlsw remote 0 tcp 10.2.2.2 keepalive 0 timeout 90 ...

Does the tn3270 server (with CIP/CPA on 7200) router can be attached to a IBM mainframe running VSE/ESA operatinf system ?

Hello,I have IGX8430; I want to exact allocation of cells on trunk. I am confused with trunk bandwidth calculations. I am looking for this information so that i can findout/determine the shifting of connections on trunks.What is cell size and how man...

Hello,I have a Cisco 1721 Router which I use as central side DLSW Peer Router. We use TCP. We now have 15 DLSW TCP Remote Peers active. Peer Number 16 doesn't come up. CPU Load is 5 %, memory is almost emty. SW ist 12.3(6). Because it is already in p...

I would like to configure a Cisco router as a bootp server to load a digital terminal server with a file "mneng2.sys" from the router flash, instade from a remote bootp server over the wan. need help on configuration does it support?

Hi,i try to replace my IBM3745 X.25 Multichannel by Serial Port of my Router. Therefore i have to support SVC's. I do not have the X.121 addresses of the SVC clients, so i cannot define "x25 qllc map...".i can't find a example for definig something l...

Hey guys,Can anyone shed any light on the "U Design" server farm building block.Typically, we have a server farm distribution pair of switches and the server farm access switches connect to both distribution switches in the typical "V design". Now th...

Dear ProfessionalsI have 4507R + 2 X SUPII_Plus + cat4000-i9s-mz.121-19.EW1.binFollowing dump seems to be not configured correctly to redundancy. What can I do to fix this problem.------------------ show running-config --------------.....!redundancy ...

Hi,I'm a newbie in this area. I'm trying to connect a OS/2 SNA server to a S/390 mainframe using DLSW. The connection will look like this:OS/2 SNA Server ---> Cisco 2500 w/DLSW ---> IP Backbone --- > Cisco 7513 w/CIP ---> S/390.The status is as follo...

I'm trying to utilize a CAT5 (568B Pinout) to connect a PC (serial port) to a 7204 (console port). We do not have any blank RJ45 ends to re-terminate the cable, so I'd like info on the DB9 pinout to facilitate this please. TIA,Bart

The UAB Health System network is part, but separate from the uab campus network. The campus is basically our ISP. The drawing above shows the existing link (all the devices that are not highlighted in red). We are planning to add redundancy to our in...