About N2K-C2232TM-E-10GE problem ?

[HAOYOUJI123]

what's wrong with this problem ？

When I insert the N2K-C2232TM-E-10GE  on  eth131/1/1 port ，but this port always  keep down status . and another port is OK

 Eth131/1/1  Down       Po131
 Eth131/1/2    Up       Po131
 Eth131/1/3    Up       Po131

what's wrong with this port ？

Does N2K-C2232TM-E-10GE  can not nonegotiate with 100M/bps server ？

[Wes Austin · Accepted solution]

Hello,

Checking here:

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-2000-series-fabric-extenders/product_bulletin_c25-715278.html

I see:

Cisco Nexus 2232TM-E

32 x 1/10GBASE-T host interfaces and uplink module (8 x 10 Gigabit Ethernet fabric interfaces [SFP+]; superset of Cisco Nexus 2232TM)

This leads me to believe it will only do 1G or 10G, other models have 100/1000 listed for host interfaces.

100 MBps does not appear to be supported on the 2232TM-E-10GE.

HTH,

Wes

[HAOYOUJI123]

Hi Wesley Austin

thanks for you

The N2K-C2232TM-E-10GE has connected the avaya voice switch & this port  also down status .

what's wrong ？did the  N2K-C2232TM-E-10GE can not support voice switch ？

                                                                                                     from Hao

[Wes Austin]

Does the Avaya switch support 1000 mbps?

Make sure the interface on the Fex is set for:

- Auto-negotiation or statically set for 1000 and not 10000

-Is this copper or fiber?

-Duplex settings on the Avaya switch set correctly

- Does the link come up on the Avaya if you plug a PC in to the same link?

-Does the FEX HIF come up if you plug in a PC to it's interface

-Have you tried other cables/optics if applicable?

If you provide some further info, I will be glad to assist.

-Wes